Question: Can I Use 1333 And 1600 Ram Together?

Can I use 1866MHz RAM with 1600mHz RAM?

Yes, while not ideal there’s no harm in running mismatched RAM.

Typically the faster RAM will run slower at the speed of the slowest module..

Is it OK to mix and match RAM?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. They can be different speeds, and made by different manufacturers. … Different brands of Ram are fine to use together.

Which is faster 1333MHz or 1600MHz?

2 Answers. The 1600Mhz CL10 RAM has a higher clock speed (800MHz versus 666MHz) and a lower latency (12.5 ns versus 13.5 ns), so it’s the hands down winner. So, even though CL10 is a higher divisor than CL9, the increase from 1333MHz to 1600MHz in the numerator is more than enough to compensate for that.

Does the speed of RAM matter?

Whether or not your RAM speed is fast enough will depend on the type of CPU that you have. Your RAM’s speed does not alter how fast your CPU goes, even when overclocked or hyper-threaded, but it can slow the CPU down depending on if your RAM is full or not.

Can I use 1333mHz and 1866MHz RAM together?

Yes many people will recommend getting matching sticks of RAM, but I almost never run into issues and I mix and match RAM all the time. For example, If you put just one 1866MHz RAM into your motherboard, it will still run at 1333MHz by default until you go into the BIOS and overclock it to 1866MHz.

Can I put 1600mHz ram in a 1066mhz slot?

So the answer is that 1600 Mhz memory modules may not work in a slot that supports only upto 1066 Mhz.

Can I combine 4gb and 8gb RAM?

That’s why it’s best to use the same model in all slots. However, this doesn’t mean you can’t use different size RAM sticks together. For example, if your first stick is 4GB, you can still add a new 8GB stick. … Your RAM sticks will work together at the frequency of the lower stick, by default.

Can I add 8gb RAM to 4gb laptop?

If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)

Can I use two different RAM speeds?

You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. … You cannot mix DDR, DDR2, DDR3 in a system as each technology requires a different type of socket.

Can I use 1600mHz RAM on a 1066mhz board?

Can I run my 1600 MHz DDR3 RAM on a motherboard which supports 1066-1333 MHz DDR3 RAM speed? … Yes , but RAM speed will be only 1333mhz at max if it is only the one stick being used .

Is 1600 RAM speed good?

In general it is good enough and it actually is the fastest kind of memory supported on locked Intel motherboards before socket 1151. Though if you have a Z87/Z97 motherboard and unlocked K cpu, then getting memory faster than 1600MHz can be beneficial.

Is 32gb RAM overkill?

32GB, on the other hand, is overkill for most enthusiasts today, outside of people who are editing RAW photos or high-res video (or other similarly memory-intensive tasks).

Can I use 1066 and 1333 Ram together?

You can mix RAM of both speeds (1066/1333). The system will automatically use the slower speed, but there is no risk of system crashes.

Is there a big difference between 1333 and 1600 Ram?

The 1333 and 1600 designations refer to the transfer rates – theoretically, given same CAS latency, DDR3-1600 would perform better than DDR3-1333 due to its greater maximum bandwidth.

Does dh61ww support 1600mHz RAM?

Splendid. Intel® Desktop Board DH61WW no, your mobo is limited to 1333mhz, no overclocking possible. but you will be able to run all 16gb. for optimal performance try tightening timings a bit!